I was moseying through youtube and found this guy with a Ferrita exhaust that sounds amazing!

http://youtube.com/watch?v=2Rlg60yzceAcheck it out.

And their site is http://www.ferrita.com/eng/default.asp?c=shop&cat=23&subcat=79&id=

Just thought I'd share since it's the best exhaust I've heard on a volvo

Not bad!

I would check out these heart-aching, quad-outlet exhaust too. See attached.

....[8D]


JPN

local://upfiles/6892/587420E3A5DE4571B434E6DD20BDEA49.jpg

http://www.mamakk.com/wp-content/volvo.jpg

Bet he has no back pressure problems.:)

I once seriously thought about taking a kerosene salmander heater and installing it in the trunk of my PV544 to make it look like I had a jet engine. I would cut a hole and have the exhaust end of the heater stick out the trunk lid like a jet exhaust. I would also wire up a switch to turn it on so at night it would look like I had an afterburner . yee-haw!

Fortunately I instead installed a IPD header piped into a cherry bomb and thus survived my youth.

http://www.jacksons-camping.co.uk/heaters/images/indstrail-heater2.jpg

http://www.ronpatrickstuff.com/

Some people do get into the extreme indeed.....[8D].


JPN

local://upfiles/6892/157950997FA149BAB717FA423863BC28.jpg

you have to admit though, that ferrita exhaust is pretty nice.

Not that the 10 pipes out the back isn't!! haha

That car is bad ass and souns soo good I have that video in my favorites heres one for you man, this is probably my fav video for 850's http://youtube.com/watch?v=Ew6YwIN2IQc&feature=related

yeah, who hasn't seen the overladded video? haha its good though

Key Bang !


http://www.britishcarpartsco.com/blownExhaust.JPG

does neone know how much that would cost in dollars? on their website its only in euros :(

i looked it up and its around 550 or something.

Google conversion calculator if you neeed to know

550 for that?!?!? pretty interested now..

And you could have a local shop fab you a catback system for less then $550.

if you like that exhaust, wait til i build mine. and it will cost me no more than $300. check for it in the C70 thread.

ORIGINAL: PANTYEATR

if you like that exhaust, wait til i build mine. and it will cost me no more than $300. check for it in the C70 thread.


You probably know this, but for the turbos, you wanta "straight through" type muffler instead of a chambered one. It is better for the turbos.

There is actually a guy locally who does 2.5" for 250 bucks, which is a pretty good deal.

i'm going with magnaflow since i was digging them before they even got popular.some mandrel bent pipes and maybe a magnaflow cat. i'm gonna build it from the turbo back.

that'll sound real good. im thinking of getting my 3" DP pretty soon for about $200! now that im on this..

can i get the 3" dp and hook it up to my stock pipes?

Then when i go full 2.5 there will be no problems? or will i need an adapter of some sort

ORIGINAL: yert315

that'll sound real good. im thinking of getting my 3" DP pretty soon for about $200! now that im on this..

can i get the 3" dp and hook it up to my stock pipes?

Then when i go full 2.5 there will be no problems? or will i need an adapter of some sort


if your down pipe is 3" and you wanna go down to 2.5 your gonna create a restriction. the factory turbo is really small and a 2.5" down pipe would be an improvement to that. now if you have a T3/T4 turbo, something bigger or your running 15psi of boost, you will benefit from that 3" DP.

i'm going with 2.5" pipes from the turbo back and i'll be using 3 magnaflow round mufflers to make the sound nice, without that honda dirt bike rasp.

3 mufflers is quite a bit. I was thinking just doing 2 mufflers- if that.

and yes I will be running close to 15psi once I get my MBC on, so 3" dp it is.maybe full 3"

but im getting the dp first and am wondering if it is interchangable with the stock pipesthen tolarger pipes when I get them