volvo drag car?
#2
#4
#7
here is some inspiration for you ‪Supercar Volvo Turbo 275 km/h @ 7.90 s‬‏ - YouTube
#9
#11
#13
good luck. you'll probably need something around 550 BHP (at the flywheel) to break 11s with a 3000 lb car (including driver). a stock volvo 240 is about 3000 lbs wet. I don't think the Dana 30 rear end in a Volvo can handle any more than 300-400HP and that only if you're really ginger about using it, so you'll be building a total car from scratch. when you''re done, it will be a funny car more than a volvo and it won't be any fun to drive in traffic.
#14
Last edited by sbirchfield; 08-10-2011 at 09:21 AM.
#16
Kenny's 740 was doing 10sec passes @ 580(somehing)whp untill he flipped 14 times on his way to do more dyno tuning. Volvo powered, volvo shifted, volvo rear end, and he drives it on the street
Volvolution - Volvo Forum & Message Board • View topic - 1990 740 GL
Here is his new replacement car, and this time, he is going for 9 sec passes. Kenny's 1990 740 GLE, goin' for 9's - Turbobricks Forums
Right now it dyno'd just over 600 whp. volvo powered, volvo rearend. still being built but he drives on the street.
Rob's 242 did an 11.8sec pass with just shy of 300whp ‪Volvo 242 11.8‬‏ - YouTube
Here is his build thread: Rob Prince's 242 Resurrection - Turbobricks Forums
VOlvo powered, volvo rear end. drives on the street. when it was driving.
Volvolution - Volvo Forum & Message Board • View topic - 1990 740 GL
Here is his new replacement car, and this time, he is going for 9 sec passes. Kenny's 1990 740 GLE, goin' for 9's - Turbobricks Forums
Right now it dyno'd just over 600 whp. volvo powered, volvo rearend. still being built but he drives on the street.
Rob's 242 did an 11.8sec pass with just shy of 300whp ‪Volvo 242 11.8‬‏ - YouTube
Here is his build thread: Rob Prince's 242 Resurrection - Turbobricks Forums
VOlvo powered, volvo rear end. drives on the street. when it was driving.
Last edited by TIPSP; 08-10-2011 at 05:30 PM.
Thread
Thread Starter
Forum
Replies
Last Post