Cam timing tool for use on 960
#1
Cam timing tool for use on 960
I own three Volvos: a 960 (97) and two 850s (94 and 1996)
All three need timing belts and two (one 850 and the 960) need serpentine belts. I know that a serpentine belt tensioner tool will make replacing the serpentine belt easier.
I also need to know about the cam locking tool.
Owners of 850 have the one which is four rods coming out of a metal plate. I believe it's made by IPD. I also need to know if this same tool will lock the cams in the 960 motor to make timing belt changes on the six-cylinder easier.
Can Anyone confirm that this tool is a good one to get for the 960 engine? It would seem that it is, since it is a close relative of the 960 motor.
Thanks!
All three need timing belts and two (one 850 and the 960) need serpentine belts. I know that a serpentine belt tensioner tool will make replacing the serpentine belt easier.
I also need to know about the cam locking tool.
Owners of 850 have the one which is four rods coming out of a metal plate. I believe it's made by IPD. I also need to know if this same tool will lock the cams in the 960 motor to make timing belt changes on the six-cylinder easier.
Can Anyone confirm that this tool is a good one to get for the 960 engine? It would seem that it is, since it is a close relative of the 960 motor.
Thanks!
#2
I own three Volvos: a 960 (97) and two 850s (94 and 1996)
All three need timing belts and two (one 850 and the 960) need serpentine belts. I know that a serpentine belt tensioner tool will make replacing the serpentine belt easier.
I also need to know about the cam locking tool.
Owners of 850 have the one which is four rods coming out of a metal plate. I believe it's made by IPD. I also need to know if this same tool will lock the cams in the 960 motor to make timing belt changes on the six-cylinder easier.
Can Anyone confirm that this tool is a good one to get for the 960 engine? It would seem that it is, since it is a close relative of the 960 motor.
Thanks!
All three need timing belts and two (one 850 and the 960) need serpentine belts. I know that a serpentine belt tensioner tool will make replacing the serpentine belt easier.
I also need to know about the cam locking tool.
Owners of 850 have the one which is four rods coming out of a metal plate. I believe it's made by IPD. I also need to know if this same tool will lock the cams in the 960 motor to make timing belt changes on the six-cylinder easier.
Can Anyone confirm that this tool is a good one to get for the 960 engine? It would seem that it is, since it is a close relative of the 960 motor.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
Stormy5621
Volvo S80
6
07-24-2014 03:38 AM