Tool Adapter for 850/960/S70/V70/S90 Serpentine Belt Tensioner
Serpentine belt tensioner adapter and holder, $9.50 (each additional kit $6.50). I have more than 10 available.
Fits the tensioner for the following vehicles: - 850 = '94 - '97 - 960, S/V90's = '95 - '98 (maybe earlier models as well). - S/V70's = '98 TOOL KIT: http://www.atthetipwebs.com/technolo.../pics/tool.JPG TENSIONER: http://www.atthetipwebs.com/technolo...0/PICT1076.JPG I kinda got tired to fumbling with my plumbing adapter when taking my serpentine belt tensioner loose, dropping it down into the motor, slipping pipe wrench, etc.. So I decided to get something easy for me and didn't want to pay $30 plus shipping for the proper tool. Well, the size was not standard so it was a little challenging. Long story short, it was a little expensive to get just one made so I thought if I had several of them made I could share them (and a little of the cost) with others. So here you have it, a small kit to take your belt tensioner loose and pin it retracted. A few of them cost me way to much but hopefully a few of you guys can use something small for your box (or 2) that you can toss in your pocket if you'd like. It's solid steel so it should last forever. If you need one, I'll give you a 100 year warranty. The screw fits perfectly as well, leaves a little out so it's easy to remove with your fingers. Part plus shipping will be $9.00 (A lot cheaper than $30 plus shipping). That will cover the parts, package, shipping, and give me couple of $$$ to offset my bulk cost. If you want one or two of them (or more) please pm me. Each additional set will be $6.50. Please purchase a few. Solid steel stud that will fit in the serpentine tersioner hole and leave enough out to put a wrench on. Once set in, it will not fall out. It's a good fit. |
Just got mine yesterday, and I must say every 850 owner needs one of these. It was even coated bright yellow, so I'll be sure to never lose it! If you do any wrenching on your car, you owe it to yourself to get this tool.
|
Thanks man, glad you like it.
|
Still for sale? How soon would you ship out? You can Paypal invoice me info@spcc.us
Thanks |
Yes I do still have several for sale. When I am out, I will post that I'm out.
|
Can I buy the tensioner tool?
Is it poosible for me to purchase the special tool manufactured to release the tensioner in my volvo 850?
|
Yes... PM me.
|
Do you have any of these kits remaining to sell?
|
Yes. PM me.
|
Sent payment.
Thank you. |
Gotcha, will ship tomorrow.
|
PM sent.......
|
new on this site. not sure how to PM, but I would like one please asap.
Thanks, Bob |
New tool set.
|
I know I'm possibly reviving a dead thread here, but do you have any more sets for sale? I'm interested.
|
Hey Robert this Jeff I was seeing if you had any more serpentine belt tools
|
Hey I need one of these tools from you
|
I have many, send me your address so I can ship one to you.
|
My address is 1118 Tomas sw Albuquerque New Mexico my number is 505 831-3510
|
Originally Posted by rspi
(Post 332863)
Serpentine belt tensioner adapter and holder, $9.50 (each additional kit $6.50). I have more than 10 available.
Fits the tensioner for the following vehicles: - 850 = '94 - '97 - 960, S/V90's = '95 - '98 (maybe earlier models as well). - S/V70's = '98 TOOL KIT: http://www.atthetipwebs.com/technolo.../pics/tool.JPG TENSIONER: http://www.atthetipwebs.com/technolo...0/PICT1076.JPG I kinda got tired to fumbling with my plumbing adapter when taking my serpentine belt tensioner loose, dropping it down into the motor, slipping pipe wrench, etc.. So I decided to get something easy for me and didn't want to pay $30 plus shipping for the proper tool. Well, the size was not standard so it was a little challenging. Long story short, it was a little expensive to get just one made so I thought if I had several of them made I could share them (and a little of the cost) with others. So here you have it, a small kit to take your belt tensioner loose and pin it retracted. A few of them cost me way to much but hopefully a few of you guys can use something small for your box (or 2) that you can toss in your pocket if you'd like. It's solid steel so it should last forever. If you need one, I'll give you a 100 year warranty. The screw fits perfectly as well, leaves a little out so it's easy to remove with your fingers. Part plus shipping will be $9.00 (A lot cheaper than $30 plus shipping). That will cover the parts, package, shipping, and give me couple of $$$ to offset my bulk cost. If you want one or two of them (or more) please pm me. Each additional set will be $6.50. Please purchase a few. Solid steel stud that will fit in the serpentine tersioner hole and leave enough out to put a wrench on. Once set in, it will not fall out. It's a good fit. Hello Robert, I have sent you an order via PM, please check your message box. Thank you! |
All times are GMT -5. The time now is 05:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands