1987 244 inner tie rods...
so our old brick, the ~400K mile 240GL sedan my wife bought new in december 1987 (its 24 now!) has a badly worn left inner tie rod, there's about 1/2" of in/out play at the inner ball joint.
car has the TRW/CAM racks (the bootie has small end clamped to tie rod) so I ordered the parts from FCP... begin to commence to take the old ones off and whoa, they don't have any flats? https://lh4.googleusercontent.com/-m...0/IMG_0070.JPG here's the new part I got... https://lh4.googleusercontent.com/-Q...0/IMG_0052.JPG do I use a pipe wrench on the old one?? |
and my own answer is yeah, pipewrench easily took off the old ones.... except, OOPS, I got the wrong replacements, looks like i need the ZF inner tierods that have bolts sticking out, instead of inside threads. so the car sits disabled on jackstands til I can get replacements rushed out :-/
|
All times are GMT -5. The time now is 05:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands