2000 S40 seat project
 

I just got some nice S40 bucket seats to put into my truck from a 2000 S40. Anyone know where I can get a wiring diagram or simply get some info about the amperage requirements for driver power seat. (I'm not hooking up the heater in either seat). The gauge of wiring in my truck's harness is somewhat smaller than the S40 power connection. The seats are going into an '04 Tacoma.
Thanks for any help.

RE: 2000 S40 seat project
 

Give me a day or so and I will see what I can dig up for you.

RE: 2000 S40 seat project
 

Thanks

RE: 2000 S40 seat project
 

The pics might be a little hard to see I dont have a scanner.I had to take a picture of the photo copy.If you cant see the wire colors the Acc. wire (switched with key)blue and black.The 12v source is blue and yellow for one and yellow and violet for the other.And the ground wire is black.It runs through a 25amp fuse.I hope this helps you.

[IMG]local://upfiles/853/290D7D3B15E24CAE96E8B10DB9E19BA0.jpg[/IMG]

[IMG]local://upfiles/853/EA20CED9DD19489196846C597A190371.jpg[/IMG]

[IMG]local://upfiles/853/DAD0A636786F41B0A6FA2B677FB5B004.jpg[/IMG]

[IMG]local://upfiles/853/AA2DCADD03A3429F904C15D523054146.jpg[/IMG]

RE: 2000 S40 seat project
 

Tech, I just wanna say, you are the f***in man

RE: 2000 S40 seat project
 

Thanks for doing that for me! I can view the pic's very well, and they help.
Dan

RE: 2000 S40 seat project
 

No problem anytime