Rear passenger wheel bearing is starting to sing to me on the highway...and out of tune to boot! Figure it's time to replace (155K). Anyone have Vadis instructions to share on the procedure?

Also, any recommendations for good online resource for OEM parts?
Thx,
Rick

 

its not too difficult just remove the wheel,then unbolt the caliper set of to the side.remove the rotor and look for 4 bolts on the rear of the hub.remove the 4 bolts and the wheel bearing can come out.

 

Any advice on removing the 4 bolts? I'm stuck at this stage because I basically cannot get to them simply by jacking the car up. Do I need to remove anything else?