Just wanted to quickly say hi, and thanx! I came on here after just purchasing my s80 t6, because I found my low beams were not working, and I had that "beam dipped, bulb failure" message on the dash. Thanks to this forum, I found the resistor in the CEM, was burnt slightly on one pin, and cleaned it with alcohol, reinstalled, and it works. Saved me a bunch of cash on this one!

 

Glad the forum was useful.

 

I'm glad the forum was helpful for you... because I have the same issue. Can anyone clear-up which resistor it was. I can get into the unit, I just didn't want to start pulling them out without knowing what they were related to and knowing exactly where they go back. Any help would be greatly appreciated.

~Brad

 

First look closely and see if there is any burn marks. If there is that will lead you to the proper one. My PC with Vadis to get the pics crashed.