I have never had the chance to take out my seats but I can't imagine it being that difficult. Undo about four bolts or so and unplug the wiring harness. That was a guess. Just make sure that the donor seats are from the same year or another year that will be a direct fit.
I would think about dying them if you don't have another set of seats. I have never done this either and I might be worried about the black dye turning my white paints black on the bum. I sure don't wear white paints but if my girlfriends white paints turned black, OUCH! Anyways, here is a link and some directions. I sure would not skip a step or buy cheap dyes for the risk I mentioned above. Good Luck, oh ya if you do do this let us know how it turns out with some pictures!
http://www.leatherique.com/do_it_your_self_instruction/
98 v70XC interior swap?
