Volvo S60 II 2011 - Code 097 & 021
Thread Starter
|
Junior Member
Joined: Dec 2021
Posts: 3
Likes: 0
Volvo S60 II 2011 - Code 097 & 021
Hi All
I have a Volvo S60 and have just replaced the cylinder head due to cambelt failure.. The problem Im having is I have the "Engine Service Required" when I try to reset with trip buttton it gives the codes 097 & 021.. Ive done some reading up and this usualy means oil level.. I've checked the oil level and this is sitting at 72% on vida or 1 bar off full on dash.. Im at a loss with this .. Also the car seems to be in limp mode as there is no acceleration.. when I reset using vida the car is fine no codes and accelerates away no problem.. but after a couple of miles it re-appeares along with the limp mode..
Any suggestions why this is happening..
I have a Volvo S60 and have just replaced the cylinder head due to cambelt failure.. The problem Im having is I have the "Engine Service Required" when I try to reset with trip buttton it gives the codes 097 & 021.. Ive done some reading up and this usualy means oil level.. I've checked the oil level and this is sitting at 72% on vida or 1 bar off full on dash.. Im at a loss with this .. Also the car seems to be in limp mode as there is no acceleration.. when I reset using vida the car is fine no codes and accelerates away no problem.. but after a couple of miles it re-appeares along with the limp mode..
Any suggestions why this is happening..
Senior Member
Joined: Jul 2020
Posts: 5,113
Likes: 676
From: GA
Thread
Thread Starter
Forum
Replies
Last Post