Sweed Speed Project Car

 

Looks like he is off to a good start. Few things I feel are out of place; exhaust clamps and the raised buttons on the center console. I like what he did with the CF overlay and might have to copy that.

 

I did that about 5 months ago and its fairly easy... Only cost me $30 and took me 20 min..

Im actually contemplating on doing my roof and maybe part of my Hood..

This was just a test to see how it looked and I do plan to re-do it and make it look a little neater.



The white is the OLD gauge



If you are going to do it go with the real 3M Di-Noc it comes in 7 colors, stay away from the imitation stuff.
Until Our dealer app gets approved you can buy it from here
--->Carbon Fiber Film | Dedicated To Selling 3M Carbon Fiber DI-NOC Vinyl

 

Did you pull the trim out or just install with the trim in place? The roof would look sweet! Curious what your plans are for the hood. I have been playing with the idea of grabbing a junk yard hood and painting it black. Keep the stock one red for the next owner.

Looks good btw. I have the dark rose faux wood, doesn't look bad but just seems dated to me.

 

Same here I just needed a change.
I did it in the car, only removed the radio and the climate control.

All you will need is the Di-Noc, a red-dot knife, a soft tint squeegee, a heat gun, and some patience.

I was thinking about just the center v part from the top corners and around the grille. I upload a pics so you could see what I was talking about.

 

Yes,I see.This is very important.

 

That stuff looks awsome. Looking at the site, the car console, I wonder how they got that so glossy?

The initial car I seen it in, the SwedeSpeed project car, the guy sold the car 2 years later (in 2007). If I did a project car I think I would keep it for at least 5 years. Sometimes life changes...