940 stumbles while cruising
#42
![Default](/forum/images/icons/icon1.gif)
311 code is missing speed signal from the speedometer. Without this signal you may notice some driveability issues such as the engine stalling when coming to a stop. 322 is air mass meter wire burn-off signal faulty or missing.
Take a look at the engine codes from the 700/900 series FAQ: https://www.brickboard.com/FAQ/700-9...InjectionFault
I had the 311 code throw on my 240 and the problem was a bad chip in the speedometer. I replaced the chip and that solved my problem. Could also be a missing or broken wire coming out of the speedometer. I'm not familiar with the 900 series so I don't know what the color of the wire is. Perhaps others on the board can chime in.
Take a look at the engine codes from the 700/900 series FAQ: https://www.brickboard.com/FAQ/700-9...InjectionFault
I had the 311 code throw on my 240 and the problem was a bad chip in the speedometer. I replaced the chip and that solved my problem. Could also be a missing or broken wire coming out of the speedometer. I'm not familiar with the 900 series so I don't know what the color of the wire is. Perhaps others on the board can chime in.
Thread
Thread Starter
Forum
Replies
Last Post
greenbluei
Volvo 850
21
06-23-2010 11:41 AM