How many clicks should have on TPS?
Thread Starter
|
Junior Member
Joined: Sep 2008
Posts: 19
Likes: 0
How many clicks should have on TPS?
How many clicks should have on Throttle Position Switch?
I got fault code 2-3-3 on 94 940 non turbo.
I checked IAC it seems like open all the time while it running.
I took TB out checking the TPS with multi tester.
First click come as soon as blade open and second click come blade open about half way.
First click cutting continuity between pin# 2 and 10. Second click connecting continuity between pin# 3 and 10.
Is this normal or I got bad TPS?
Thanks in advance.
I got fault code 2-3-3 on 94 940 non turbo.
I checked IAC it seems like open all the time while it running.
I took TB out checking the TPS with multi tester.
First click come as soon as blade open and second click come blade open about half way.
First click cutting continuity between pin# 2 and 10. Second click connecting continuity between pin# 3 and 10.
Is this normal or I got bad TPS?
Thanks in advance.
Thread Starter
|
Junior Member
Joined: Sep 2008
Posts: 19
Likes: 0
With the ignition on I get 12v at the IAC connector even I removed TPS connector.
I get 12v at the IAC all the time.
I think it should cut voltage off at the IAC connector when I removed TPS connector.
What do you think?
Thanks.
I get 12v at the IAC all the time.
I think it should cut voltage off at the IAC connector when I removed TPS connector.
What do you think?
Thanks.
Junior Member
Joined: May 2022
Posts: 7
Likes: 0
From: Stafford
mine does the same thing, it has 12v all the time.
Thread
Thread Starter
Forum
Replies
Last Post
mphilleo
Volvo 240, 740 & 940
0
Feb 22, 2016 10:29 AM
