C70 Subframe Mounting
#1
08-19-2018, 12:30 PM
Join Date: Aug 2018
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
C70 Subframe Mounting
Hi hoping someone can help.I have a C70 Mk1 convertible that I am in the process of renewing the clutch.My problem is the front subframe mounts.The nearside has a spigot fitted to the body which fits the subframe bush front and rear.The driver side has nothing just the M14 bolt through the subframe bush this does not look right to me. I have tried Volvo dealers but cannot get any help.
#3
08-19-2018, 01:49 PM
Join Date: Aug 2018
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
C70 subframe
Hi Tony
Thank you for your prompt reply. Sorry for delay but had to work out how to attach picture.
This picture shows rear spigot (attached to body) about to locate in subframe bush, there is another at the front.
This is on the near side only(RHD) on the offside the M14 bolts just pass through the 25mm subframe bush.
I have read that the convertible uses metal bushes but surely not one side only.
Regards Greg
Thank you for your prompt reply. Sorry for delay but had to work out how to attach picture.
This picture shows rear spigot (attached to body) about to locate in subframe bush, there is another at the front.
This is on the near side only(RHD) on the offside the M14 bolts just pass through the 25mm subframe bush.
I have read that the convertible uses metal bushes but surely not one side only.
Regards Greg
Thread
Thread Starter
Forum
Replies
Last Post