Do they work in circuit?....meaning if I remove one bulb and holder from temp setting, will it cause the other two to not function. I only had that one bulb out, the bulb for fan speed worked and so did the selector for air, defrost etc.

Since I removed the bulb and holder, none of my lights work, I am guessing the holder in place completed the circuit and that is why the other ones were working.


Man were my ***** sticky, each one I soaked in goo be gone for five minutes rubbing them with a rag to get clean. The **** to select the defrost cam off so now it will be a guessing game where to turn it to, the other two I was able to mark their positions.

Last but not least, does anyone know of where or what base they use, I know it is not a T3 wedge but if I knew exact base it would simplify ordering them.

Thanks and Merry Christmas, happy holidays!

 

Just a quick update, I ordered 150 lights in different colors and have both 3mm and 5mm sizes so I should be ok, will let post how they work.