S40 2010 1.6 DPF Problems ECM-2A40
Thread Starter
|
Junior Member
Joined: Oct 2021
Posts: 1
Likes: 0
S40 2010 1.6 DPF Problems ECM-2A40
Hey, had a limp mode , so changed DPF pressure sensor. Now no limp mode, but i am getting ECM-2A40 particulate trap code and looks like that my filter keeps regenerating every trip (also poor fuel economy, slow acceleration and a strong smell of gasoline or soot, radiator fan keeps running after stopping the car for couple minutes). Few days ago forced regeneration has been done. Car has 190 000 km and never Dpf filter has been changed. Could be the dpf temperature sensor fault or filter dead already?
Junior Member
Joined: Jul 2022
Posts: 1
Likes: 0
Hey, had a limp mode , so changed DPF pressure sensor. Now no limp mode, but i am getting ECM-2A40 particulate trap code and looks like that my filter keeps regenerating every trip (also poor fuel economy, slow acceleration and a strong smell of gasoline or soot, radiator fan keeps running after stopping the car for couple minutes). Few days ago forced regeneration has been done. Car has 190 000 km and never Dpf filter has been changed. Could be the dpf temperature sensor fault or filter dead already?
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
