ABS MODULE 99 S80 T6
#62
RE: ABS MODULE 99 S80 T6
Guess what.... I got the BRAKE FAILURE STOP.... ; car skidding; ABS; BRAKE. Yellow Triangle...etc.
So I tried to disconnect the battery for five mins...nothing Messages still there. Then I moved on and gave the car a jump with my friend truck. turned the ignition swtich three times and it fired up. I drove the car for about 10 miles and then the RPM gauge start working, and then miles later then speedometer worked but the messages remain. I also notice the CHECK ENGINE was on for a few miles. I stopped at Auto Zone check then battery and alternator... test to be good. Could my ABS MODULE be bad? How can I get rid of the messages BRAKE FAILURE............: BRAKE, etc.
So I tried to disconnect the battery for five mins...nothing Messages still there. Then I moved on and gave the car a jump with my friend truck. turned the ignition swtich three times and it fired up. I drove the car for about 10 miles and then the RPM gauge start working, and then miles later then speedometer worked but the messages remain. I also notice the CHECK ENGINE was on for a few miles. I stopped at Auto Zone check then battery and alternator... test to be good. Could my ABS MODULE be bad? How can I get rid of the messages BRAKE FAILURE............: BRAKE, etc.
#63
#64
RE: ABS MODULE 99 S80 T6
Do you know if a CEM can be repaired?
You know what I had a problem with my low beam lights. I use to have the the Bulb Failure Dipped Beam message before.... today I bought the resistor from VOLVO for like 11.00 and nothing... the low beam lights don't even turn on.
And yeah I've driving the car today and nothing is going wrong besides the messages are still there.
So any shop that works on european cars can do it if they have the to clear the codes right; because I don't want to go to the dealership
You know what I had a problem with my low beam lights. I use to have the the Bulb Failure Dipped Beam message before.... today I bought the resistor from VOLVO for like 11.00 and nothing... the low beam lights don't even turn on.
And yeah I've driving the car today and nothing is going wrong besides the messages are still there.
So any shop that works on european cars can do it if they have the to clear the codes right; because I don't want to go to the dealership
#65
#68
RE: ABS MODULE 99 S80 T6
So I check the RESISTOR and the FUSES... GOOD... and I also checked the bulbs good.. what else can I check?
Back to the ABS MODULE: there's two connectors to the ABS MODULE.... if one is not connected right would it cause messages to show up? How tight do the 4 screws go?
Back to the ABS MODULE: there's two connectors to the ABS MODULE.... if one is not connected right would it cause messages to show up? How tight do the 4 screws go?
#72
RE: ABS MODULE 99 S80 T6
UPDATE on the ABS MODULE. Well I sent the part to BBA REMAN in MA and they found it was faulty. Rebuild it in a day and got it the next day UPS. But anyhow I just installed it back in- Now I get STC SERVICE REQ, ABS SERVICE REQ, car skidding, ABS. Good thing that the BRAKE FAILURE STOP ASAP, Orange TRIANGLE, BRAKE messages are not on anymore. Can I reset the messages I have showing up now?
#75
#76
#77
RE: ABS MODULE 99 S80 T6
The small one is for the pump motor.
The bigger one is the main one. Even if the cover breaks you can slide the arms on the side and still lock the connector down.
I have seen them like that many times when changing out ABS modules and customers don't want to fix them.
For the small one maybe something in the hole? If it doesn't go in all the way something must be wrong.
The bigger one is the main one. Even if the cover breaks you can slide the arms on the side and still lock the connector down.
I have seen them like that many times when changing out ABS modules and customers don't want to fix them.
For the small one maybe something in the hole? If it doesn't go in all the way something must be wrong.
#79