BUT...How many OIL Pan O-Rings get Replaced? (low/no oil pressure light)
Thread Starter
Joined: Jan 2008
Posts: 3
Likes: 0
BUT...How many OIL Pan O-Rings get Replaced? (low/no oil pressure light)
I have a 2000 (NON TURBO 2.9) and I had my mechanic do this job due to the notorious Stop Car/No oil pressure light. After the job the light STILL Came on. I asked him how many o-rings he replaced and he said "all 3" I thought i read somewhere there were around 5...Did he miss some? He said he did nothing around the oil pump itself. Can anyone shed light on my problem, Please...Dan
Administrator
Joined: Sep 2004
Posts: 36,349
Likes: 45
From: Orlando, Florida
RE: BUT...How many OIL Pan O-Rings get Replaced? (low/no oil pressure light)
There should be 5
2 Between the pan and motor
1 for the pickup tube
2 for the oil filter crossover pipe to oil cooler.
2 Between the pan and motor
1 for the pickup tube
2 for the oil filter crossover pipe to oil cooler.
Thread Starter
Joined: Jan 2008
Posts: 3
Likes: 0
RE: BUT...How many OIL Pan O-Rings get Replaced? (low/no oil pressure light)
If the crossover/cooler pipe o-rings don't get replaced can it cause low pressure indicator? I am immagining those are the two he may have Missed. I hate to have him go back in if these have no effect on the pressure warning I get at idle...thanks for youre imput on this...really!
PS: are they inside the pan too?
PS: are they inside the pan too?
Thread
Thread Starter
Forum
Replies
Last Post
