2004 XC90 T6, Need help getting oil pan (sump) off
#21
01-12-2014, 06:57 PM
You definitely have some mechanical problem with the knocking and metal shavings. I would say you need a rebuild. But if it were my car, I'd put in a used engine. Usually sell for around $500. Car-Part.com--Used Auto Parts Market
#22
04-13-2022, 12:13 AM
Junior Member
Join Date: Apr 2022
Location: Edmonton
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Oil pan /sump removal 2004 XC90 /T6
Yes, dropped the subframe. Made an engine lift/holder out of a 4x4 and eye hooks. Then unbolted everything I could find under there until subframe dropped enough for me to get it out. I still had to fight to get it out because of the pick-up tube.
Here is a question, where do the new gaskets go? I bought the o-ring kit from volvo and there are a few gaskets in there. I see the o-rings I need to replace, but i see no gaskets.
Here is a question, where do the new gaskets go? I bought the o-ring kit from volvo and there are a few gaskets in there. I see the o-rings I need to replace, but i see no gaskets.
Thread
Thread Starter
Forum
Replies
Last Post
