So I bought a new cem due to a message start temporarily disabled. Xemodex said the cem was not good to use. So oem. Ok installed and local dealer programmed. Still no start. That message is gone but since got back from dealer there is a immobilizer see manual message and antiskid message. It cranks for a second then just stops. I originally already tried a ignition antenna ring.
So using vida I scanned recently and these are the codes. The one saying cem-1a62 is the one on this no start I think. Checked a lot of things but not seeming to resolve the issue.


And for this pic, there is no power to the fuses and in the box. Also no power to the connector in the box. Although I can power up the one wire with a power probe and it powers all the fuses again. Still don't start though. I can crank the engine constantly from the starter wire in that connector. It doesn't cut out from there when I power it with power probe.