I'm wondering if I can purchase this separately. It's The part the banjo bolt goes in. Picture is attached. Your help is appreciated, have a good one!

 

You cannot buy it for the 5 cylinder, but you can get the one from the T6 and it will work. Otherwise, you have to get the whole PCV hose assembly.

I don't have the part number though.

 

Part numbers not so important but I can't find anything on it even for the T6, any idea what you would call the part?

 

Call the dealer and ask for the PCV nipple for an XC90 T6.

 

Normally I like to do things the right way. I don't mind paying 35.00 for the part but I can't stand paying atleast 10 dollars more for shipping on it. Nearest dealership is about 3 hours away. I'd like to get it fixed. My dad does most of my mechanicing, he has the black brittle stuff peeled back to the metal. He wants to put a hose over that and the other end to connect them. Im leery of doing this. I'm wondering what everyone else thinks?

 

Bad idea. It gets too hot down there, the hose will collapse. I've seen people do that multiple times.

 

Thank you, I felt like it was a bad idea and having someone else to back up my answer makes it easier to tell my dad.

 

The part number is 30731007 I just thought I would post in case it would help someone else out.