Volvo Forums - Volvo Enthusiasts Forum
Share Your Pictures with Our Community. Upload Now
IMG 20100830 163015
IMG 20100830 163015
0 2010/08/31 16:49:10
IMG 20100830 162317
IMG 20100830 162317
0 2010/08/31 16:49:10
0605101401 00
0605101401 00
0 2010/08/30 21:03:21
0820101213 01
0820101213 01
0 2010/08/30 20:54:17
0811101405 04
0811101405 04
0 2010/08/30 20:31:32
front clean and in garage.
front clean and in garage.
0 2010/08/30 20:31:32
after cleaned and in garage.
after cleaned and in garage.
0 2010/08/30 20:31:32
backseats
backseats
0 2010/08/30 20:26:14
engine pretty shabby
engine pretty shabby
0 2010/08/30 20:26:14
drivers seat
drivers seat
0 2010/08/30 20:26:14
0 2010/08/30 20:17:05
drivers side
drivers side
0 2010/08/30 20:17:05
Advertisement
all kinds of crap hanging out of the dash and other junk in the passenger seat
all kinds of crap hanging out of the dash and other junk in the passenger seat
0 2010/08/30 20:17:05
passenger side
passenger side
0 2010/08/30 20:11:31
front with hood up
front with hood up
0 2010/08/30 20:11:31
in the yard been sitting fo two years
in the yard been sitting fo two years
0 2010/08/30 20:11:31
front view of b230f with cold air intake.
front view of b230f with cold air intake.
0 2010/08/30 20:05:01
b230f with cold air intake.
b230f with cold air intake.
0 2010/08/30 19:54:58
other view of intake.
other view of intake.
0 2010/08/30 19:54:58
all stock
all stock
0 2010/08/30 19:49:34
virgo 242gt rims put on with 205 65 15 tires put on.
virgo 242gt rims put on with 205 65 15 tires put on.
0 2010/08/30 19:49:34
front passenger view
front passenger view
0 2010/08/30 19:49:34
100711 171831
100711 171831
1 2010/08/30 11:22:29
100703 102919
100703 102919
0 2010/08/30 11:22:29
PICT6316
PICT6316
0 2010/08/29 15:11:45
PICT6318
PICT6318
0 2010/08/29 15:11:45
PICT6320
PICT6320
0 2010/08/29 15:11:45
Shop-made S80 crank holder tool Made from 1/4" x 2" aluminum scrap plate and a 1"x2" aluminum tube handle.
Shop-made S80 crank holder tool Made from 1/4" x 2" aluminum scrap plate and a 1"x2" aluminum tube handle.
0 2010/08/29 14:24:32
Shop-make S80 crank holder tool I got the hole location and a rough curve to follow by using the vibration-dampener as a template and a sharpie to rough out the lines. The curve was cut with a jigsaw and a metal cutting blade.
Shop-make S80 crank holder tool I got the hole location and a rough curve to follow by using the vibration-dampener as a template and a sharpie to rough out the lines. The curve was cut with a jigsaw and a metal cutting blade.
0 2010/08/29 14:24:32
The small engraved line between the two cogs is the front camshaft timing mark. It is located just above, and in line with the blue line on the photo.
The small engraved line between the two cogs is the front camshaft timing mark. It is located just above, and in line with the blue line on the photo.
0 2010/08/29 12:19:27
The small engraved line between the two cogs is the rear camshaft timing mark. It is located just above, and in line with the blue line on the photo.
The small engraved line between the two cogs is the rear camshaft timing mark. It is located just above, and in line with the blue line on the photo.
0 2010/08/29 12:19:27
This is a view of the crankshaft bearing carrier and crankshaft end, taken from inside the right front wheel well. The blue line shows the location of the timing mark on the corner of the cast rib. The green box outlines the splines on the crank which have been joined at the end to make a double spline 'key' for the timing belt pulley.
This is a view of the crankshaft bearing carrier and crankshaft end, taken from inside the right front wheel well. The blue line shows the location of the timing mark on the corner of the cast rib. The green box outlines the splines on the crank which have been joined at the end to make a double spline 'key' for the timing belt pulley.
0 2010/08/29 12:09:22
Advertisement