Suggestions for large decal/sticker/refridgerator magnet to cover 4x6 hole in dash?
I have a couple cracks and missing dashboard material in a roughly 3" x 5"
area of the face of my passenger side dash panel. I'm thinking that If might be covered with something like "Volvo Cross Country", or Volvo IPD, or Volvo All Wheel Drive Sticker Or similar. Its about 4 inches tall and 6 inches wide.
EDIT: 1/27/14: See my pics below of a few new ideas I had for something to glue on to the dash and cover my cracked area.
1-Dash cracks
2-Rubbermaid auto storage bag
3-dashtop sticky pad for cell phone, radar detector etc.
4-CD storage pocket designed for sun visor.
Any suggestions?
Brian in Austin
area of the face of my passenger side dash panel. I'm thinking that If might be covered with something like "Volvo Cross Country", or Volvo IPD, or Volvo All Wheel Drive Sticker Or similar. Its about 4 inches tall and 6 inches wide.
EDIT: 1/27/14: See my pics below of a few new ideas I had for something to glue on to the dash and cover my cracked area.
1-Dash cracks
2-Rubbermaid auto storage bag
3-dashtop sticky pad for cell phone, radar detector etc.
4-CD storage pocket designed for sun visor.
Any suggestions?
Brian in Austin
Last edited by bcolins; Jan 27, 2014 at 03:33 PM.
Come on guys,.....need some ideas. I can't put the giant happy face refridgerator magnet that came on it back on,......surely there is something more appropriate,.....more Volvo All Wheel drive specific......?
Anyone?
Brian
Anyone?
Brian
Finally got around to taking a few pics of my dash crack and a few ideas I had on how to cover up the crack and missing dash material areal Check out my pics in my first/original post.
Brian
Brian
Get a cheap, small (7") tablet, load Torque Pro, and an OBD bluetooth reader for it, and you'll have a glass cockpit that gives you loads of real-time data on what's going on with your engine, etc. It'll look geeky, but will impress motorheads and other nerds. You could also use it for navigation if it's GPS capable.
Or maybe you just replace the dash... (probably a lot of work, but worth it given what your current dash looks like).
Or maybe you just replace the dash... (probably a lot of work, but worth it given what your current dash looks like).
Thread
Thread Starter
Forum
Replies
Last Post



