Hello there, I have searched my problem but can't find any help as of yet so I am posting up here to see if I can get some insight. I just got a set of aftermarket speakers to replace my front door speakers that are blown. I got the door panel and speaker out. I am trying to see if I can just put my new speakers into the holder that the stock ones are in and if so how I can pull the stock ones out of the holder. It looks as if they just rotate and then pull out but I can't figure out how to do that. Also trying to figure if I can wire my new speakers to the connector on the holder so that I don't have to splice new wire in for the speaker. Thanks in advance for any help I get on this subject.