clutch replacement question 240 1990
Thread Starter
|
Junior Member
Joined: Jan 2024
Posts: 1
Likes: 0
clutch replacement question 240 1990
Do I have to move the engine to get the transmission back on?
additionally, the flywheel was machined by the previous owner. The step was 24.2mm I've read it should be 25 mm. Is that the proper spec for the dish depth? The crush will only be 3mm. My clutch was not releasing properly.
additionally, the flywheel was machined by the previous owner. The step was 24.2mm I've read it should be 25 mm. Is that the proper spec for the dish depth? The crush will only be 3mm. My clutch was not releasing properly.
Thread
Thread Starter
Forum
Replies
Last Post
fastlate
Volvo 240, 740 & 940
4
Nov 12, 2008 12:40 AM
