i am tired of messing with this car. i broke a head stud the other day so i am done. i have too much to do to take the time to swap motors...again.
here is what i have. anything i have 2 of, assume one is from a 95 and one is from a 93.
a complete 95 car with grey interior, with head removed and a 93 engine in it, i still have the 95 engine. i had the head on the 95 cut .014 but no valve job.
the intake cam is slightly harder to turn than the exhaust, due to the head being warped, i was going to put it on the 93.
the head off the 93 is better, but nothing has been done to it. the intake cam is ever so slightly harder to turn than the exhaust, but both are easier than the 95 head. next time i would have the head straightened.
i have 2 tranny's. a 95 and a 93. the 93 came out of my moms car and was well taken care of. it has 120k or so on it. the 95 has around 160k. both are very good units.
2 hoods.
new headlights for the 95. old but good headlights from the 93.
2 sets of wheels. both have good tires. i think the 95's are almost new. the 93 is a set of 5.
CD changer from the 95.
head gasket set and head bolts.
12 ignition coil packs.
new timing parts for the 93.
AC parts. both cars had working AC's.
ABS parts
air bags.

myrtle bch SC

843 222 1537

$1000 takes EVERYTHING!

 

 

Good Morning Justin:


saw your thread for parts. I need a belly pan. Must be in good condition, all holes present with tabs, no cracks, and very usable. I will pay s/h in order to receive it. Mine is "kaputz" and needs replacement.


alan brosz
Brattleboro, VT 05301