My plan is to swap every thing from 95 to the 93 and hope it works lol. Is there any thing big I should watch for? would the pvc system be the same?? The 93 motor is off an automatic and is going onto a 5spd. from the poking around ive done it appears this should work.(i hope) As long as the engine is out and easy to access is there any thing else i should take care of??? temp sensors and what not?? Thanks for your input ZR

 

My intention is to drop the whole sub frame thing tranny and all and do it on the floor. To me this seems to be the most easy way as it will all be indoors and i have access to a very nice lift. inyo would this be the best way to proceed?? ZR

 

93 is the bastard child of 850s, I wouldn't be surprised if there was something different in the wiring or something like that.

 

Many of the '93 heads have a different shape on the intake ports on the head that won't mate up with a '95 intake manifold.

...Lee

 

So far it all looks the same.... only thing is there appears to be a crank case blow by or something on the 95 thats not on the 93 but with luck i will have it back on the under carriage later today and we will see what happens