When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Please advise. Replaced output shaft bushing and seal, and while cleaning up for gasket, noticed play in the shaft .Is there a bearing that needs replaced as well? If so can it be done without dropping tranny?
end play as in in/out, or side to side play? I don't know what the specs are (a transmission rebuilder might) but I'd hazard to guess that ANY side to side play is seriously bad. and AFAIK, thats take-the-tranny-apart-and-rebuild-it-time...