AC issues

Old Jul 18, 2016 | 10:01 PM
  #1  
bne's Avatar
bne
Thread Starter
|
Senior Member
Joined: Dec 2005
Posts: 171
Likes: 0
From: Wendell NC
Default AC issues

1997 960...part of my problem with the AC is vacuum related...when I am running the AC and I am in driving mode any pressure on the gas pedal shuts off the air until i let off the gas...I know the AC unit itself is working properly ...BUT I have the heater control valve still open thus the hot water is still circulating thru the cold water side.. 1) is this heater control valve faulty because of the vacuum leak else where in the system or has it also failed and in need of a replacement? 2) where can i find a schematic of the entire refrigeration sytem? The airflow through the vents even when the system isnt stressed by the gas pedal...is still not as strong as it should be and I'm sure thats due to whatever diaphrams or rubber parts that are perished...
EDIT...I found the info in a thread i previously started...Wow getting old ...CRS was kicking in...anyway it appears that yes the heater Control valve is actuated by a vacuum bellows...I know the solenoids are working... as all the functions work from the switches..I know the refrigeration unit is fully charged and the condensor is very cold...so this is vacuum...now I need to find the souce of the leak...
 

Last edited by bne; Jul 19, 2016 at 02:20 PM.
Reply
Old Jul 19, 2016 | 03:19 PM
  #2  
Smith Volvo's Avatar
Banned
Joined: Jun 2016
Posts: 424
Likes: 1
From: San Luis Obispo, CA
Default

Originally Posted by bne
1997 960...part of my problem with the AC is vacuum related...when I am running the AC and I am in driving mode any pressure on the gas pedal shuts off the air until i let off the gas...I know the AC unit itself is working properly ...BUT I have the heater control valve still open thus the hot water is still circulating thru the cold water side.. 1) is this heater control valve faulty because of the vacuum leak else where in the system or has it also failed and in need of a replacement? 2) where can i find a schematic of the entire refrigeration sytem? The airflow through the vents even when the system isnt stressed by the gas pedal...is still not as strong as it should be and I'm sure thats due to whatever diaphrams or rubber parts that are perished...
EDIT...I found the info in a thread i previously started...Wow getting old ...CRS was kicking in...anyway it appears that yes the heater Control valve is actuated by a vacuum bellows...I know the solenoids are working... as all the functions work from the switches..I know the refrigeration unit is fully charged and the condensor is very cold...so this is vacuum...now I need to find the souce of the leak...
the issue is the vacuum motor on the drivers side of the climate control unit part #9463042. It does as you describe when the engine is under load (low vacuum condition) Unfortunately - these are no longer available - but I might be able to locate some NOS units from other Volvo dealers.

Tim
 
Reply
Old Jul 19, 2016 | 06:34 PM
  #3  
bne's Avatar
bne
Thread Starter
|
Senior Member
Joined: Dec 2005
Posts: 171
Likes: 0
From: Wendell NC
Default

Originally Posted by Smith Volvo
the issue is the vacuum motor on the drivers side of the climate control unit part #9463042. It does as you describe when the engine is under load (low vacuum condition) Unfortunately - these are no longer available - but I might be able to locate some NOS units from other Volvo dealers.

Tim
please do...I have to get this fixed soon..i commute alot from NC to GA and the summers are pretty brutal without good AC...
 
Reply
Old Jul 19, 2016 | 06:37 PM
  #4  
Smith Volvo's Avatar
Banned
Joined: Jun 2016
Posts: 424
Likes: 1
From: San Luis Obispo, CA
Default

Originally Posted by bne
please do...I have to get this fixed soon..i commute alot from NC to GA and the summers are pretty brutal without good AC...
there is literally 1 left in the US
give me a call and I'll have it drop shipped to you

Tim
800.234.5394
 
Reply
Old Jul 21, 2016 | 12:39 PM
  #5  
bne's Avatar
bne
Thread Starter
|
Senior Member
Joined: Dec 2005
Posts: 171
Likes: 0
From: Wendell NC
Default

I have yet to determine what is actually in need of repair or replacement. .so I'm not about to just throw money and parts at it until I am certain... And since I won't be taking this to the Volvo specialist it will be a bit of trial and error figuring it out.
 
Reply
Old Jul 21, 2016 | 12:51 PM
  #6  
Smith Volvo's Avatar
Banned
Joined: Jun 2016
Posts: 424
Likes: 1
From: San Luis Obispo, CA
Default

Originally Posted by bne
I have yet to determine what is actually in need of repair or replacement. .so I'm not about to just throw money and parts at it until I am certain... And since I won't be taking this to the Volvo specialist it will be a bit of trial and error figuring it out.
I think its vacuum motor #20 on the pdf if that helps you (see attached pdf)
 
Attached Files
File Type: pdf
VIDA Print.pdf (161.2 KB, 310 views)
Reply
Old Jul 21, 2016 | 04:05 PM
  #7  
bne's Avatar
bne
Thread Starter
|
Senior Member
Joined: Dec 2005
Posts: 171
Likes: 0
From: Wendell NC
Default

Motor or bellows? How much?
 
Reply
Old Jul 21, 2016 | 04:14 PM
  #8  
Smith Volvo's Avatar
Banned
Joined: Jun 2016
Posts: 424
Likes: 1
From: San Luis Obispo, CA
Default

Originally Posted by bne
Motor or bellows? How much?
the same one I quoted to your PM yesterday - it #9463042 which is no longer available - except the one NOS I located at another dealer

Tim
 
Reply
Old Jul 21, 2016 | 04:29 PM
  #9  
bne's Avatar
bne
Thread Starter
|
Senior Member
Joined: Dec 2005
Posts: 171
Likes: 0
From: Wendell NC
Default

I didnt get a Pm from you...but you did list it here...
 
Reply
Old Jul 30, 2016 | 02:48 AM
  #10  
VDonkey's Avatar
Senior Member
Joined: Oct 2013
Posts: 260
Likes: 0
Default

Hi bne

I explain here how to stop vacuum to all the vacuum bellows so that you can see if the water valve then closes.

https://volvoforums.com/forum/volvo-...16/#post409241
 
Reply
Old Nov 29, 2016 | 07:38 AM
  #11  
T77911S's Avatar
Member
Joined: Dec 2008
Posts: 56
Likes: 0
Default

i thought that diaphragm was on the passengers side and the dash has to come out to replace it.
been a very loooong time since I did mine on my 95
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:43 AM.