Hi again,I removed the lft rear door panel on my 1996, 960 in about 5 minutes without breaking anything.What I am trying to do now is raise the window all the way up and leave it until I can afford to fix it.Is there a way to disengage the motor.
Thanks for your help

 

Yes, what is wrong with it? If the motor is out you will have to take the motor loose, raise the window, re-secure the motor and it should stay up. If it rolls down but not up you may want to pull the plug on the motor.

 

Thank you rspi for your response.I still have another issue now.I found 3 screws on the motor and if there is a fourth I do not know how to get to it.

 

It's probably on the edge. Don't have a 960 anymore so I can't pull it and check.