850 R Springs question
#1
#3
#4
What do you mean the exact opposite? I didn't say R springs are higher than 850 springs, you will maybe get a drop, although it's not going to be any where near what a true lowering spring will give you. Your wagon doesn't look like it sits that much higher than a stock 850, and with how sagged your back is, your front may drop a bit and your back will probably go up.
#8
#9
my friend told me to try them, if i like them then i can pay.
I bought just the front, i dont know i read this:
http://forums.swedespeed.com/zerothr...=133730&page=1
ya, so if aftermarket springs give 1" of lowering from stock, then R springs should lower from stock too.
I bought just the front, i dont know i read this:
http://forums.swedespeed.com/zerothr...=133730&page=1
ya, so if aftermarket springs give 1" of lowering from stock, then R springs should lower from stock too.
Last edited by matt01; 03-07-2010 at 12:49 PM.
#10
Aftermarket gives slightly more than 1". And I never said that you weren't going to get a drop, but it's not going to be any where near what lowering springs will give you.
Here:
850R
http://www.cars.com/go/search/detail...5&aff=national
That R has pretty much the exact same stance as my Turbo.
Here:
850R
http://www.cars.com/go/search/detail...5&aff=national
That R has pretty much the exact same stance as my Turbo.
#11
yours has a nice stance in the front, look at mine, its retarded high, so even if i get like yours it'll be better. For the 60$ i paid (not paid yet) for shocks and struts..
and i dont want to cut my originals, so if i have to it wont hurt me to cut these ones.
you have 15, 16, or 17" rims?
and i dont want to cut my originals, so if i have to it wont hurt me to cut these ones.
you have 15, 16, or 17" rims?
#14
#15
#18
thanks^
quite possbile that there is if your FWD, since the AWD system is completly different i wouldent know. I know whats cauing my sag back there.. Nivomat to shock conversion without new stiffer springs..
wow, she's got a really nice stance now. I was reading on that sweedspeed forum that there are some sorta rear camber bushings or something that they don't make at all?? mine sags a little with neg. camber on the driver's side.
is that related to this irreplacable bushing?
is that related to this irreplacable bushing?
#19
Aha! That makes sense! thank you for clearing that up!