I bought my fog lights, ones that fit in the grill area. I looked under the bumper and found a plug type thing, It was on the drivers side and seemed like it was pluged into a plug with nothing on the other side. Is there were I will add lights? Would I be able to put a volt meter to the plug and have it register? And is there some way to turn something on to get a reading of power to those wires? The lights I bought came with all wires. I located the yellow plug under the steering wheel. Could I splice into those wires and set up the switch on the dash?

Thanks
Matt[/align]

 

The "plug type thing" is probably the OAT (outside air temp) sensor bulb.

As for wiring, I'll let others reply, as I'm not sure.


JPN

 

I haven't installed fogs before, but do a bit of research/find some wiring diagrams.

I'm pretty sure (maybe about 80%) that the car is prewired for fogs....
I wish I could help you out more, but I've never done it, and I have no clue where the wiring and everything is...

 

The car should be pre-wired for fogs. Take a look under there for an opening.

Nick