Important: Need new main engine wire harness
#1
#2
When you say new, you mean new? If you mean "out of a junk car that didn't burn" then I think everybody has that.
I can tell you that the wiring harness doesn't really come apart like you'd expect. You're going to have to cut and splice, I think. I've never seen a car built like these are. The underhood wiring is irreversibly entangled on both sides of the car. I think on the fuse box side you could probably get it all apart under the dash, but I have not tried it. On the PCM side there is additional wiring heading back through the firewall. The engine harness and all that stuff are both hooked to the computer sockets.
I can tell you that the wiring harness doesn't really come apart like you'd expect. You're going to have to cut and splice, I think. I've never seen a car built like these are. The underhood wiring is irreversibly entangled on both sides of the car. I think on the fuse box side you could probably get it all apart under the dash, but I have not tried it. On the PCM side there is additional wiring heading back through the firewall. The engine harness and all that stuff are both hooked to the computer sockets.
#3
#4
Thread
Thread Starter
Forum
Replies
Last Post
AnEskimo
Volvo 240, 740 & 940
3
09-17-2014 01:00 PM