Need help really bad
I am 17 and i just got a 1995 Volvo 850. But I i took it to get a tune up and i was told my transmission range sensor has a circuit malfunction. Do i need to get a new or rebuit tranny? Or do i just replace the sensor? The code is P0705.
Thanks,
Rex
Thanks,
Rex
Welcome to the forum.
Most likely you only need a new PNP sensor or micro switch. With a service manual, tools & a common sense for safety, you can do it yourself.
http://www.fcpgroton.com/category-ex...37/by_year/45/
JPN
Most likely you only need a new PNP sensor or micro switch. With a service manual, tools & a common sense for safety, you can do it yourself.
http://www.fcpgroton.com/category-ex...37/by_year/45/
JPN
What do you mean by the last gear, the 4th gear (top gear/overdrive)? If so the torque converter lockup solenoid may need replacement.
P0705 is "Gear Position Sensor Signal Incorrect". See attached for troubleshooting. Also hear Moderator Tech's suggestions.
JPN
[IMG]local://upfiles/6892/FAE848EF335F4B3F84536391BBB716CA.jpg[/IMG]
[IMG]local://upfiles/6892/72194DF9E14C4261A21758403EC02F57.jpg[/IMG]
P0705 is "Gear Position Sensor Signal Incorrect". See attached for troubleshooting. Also hear Moderator Tech's suggestions.
JPN
[IMG]local://upfiles/6892/FAE848EF335F4B3F84536391BBB716CA.jpg[/IMG]
[IMG]local://upfiles/6892/72194DF9E14C4261A21758403EC02F57.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
uenvyboykin
Volvo 240, 740 & 940
2
Dec 29, 2008 02:47 AM




