When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello everyone,
I'm new on the forum here, but I've already spent some time searching for the info I need (and haven't succeeded). Therefor I hoped someone here could help me, or point me in the right direction.
To explain the situation I'm in:
I bought a Renault master a few weeks back to turn it into a van. The last owner (who I don't know personally, since it was bought through a cardealer) put Volvo seats in the front. If I've done my research right, the drivers side is a Power seat out of an 850. The seat isn't working whatsoever but there is a current running through when connected to the power.
I have found a cable running out of the backrest of which I have no idea where it is supposed to go to, there are only 2 wires connected to connector. And a 4-pin connector of the seat module (which is a 9128546) which was connecter with only 2, poorly made, cables. Photos are attached to this thread. So there is no official, or fitting connector, to go on here.
I'm really wondering if there is any way to run this seat fully operational in another vehicle and if so, how exactly I should attach or rewire the stuff.
Power Seat Installation
