ok, cool, thanks for the suggestions. I am going to mess with it some more tomorrow and see if I can figure it out or at least a little clearer of where it is coming from and then post back. Thnaks guys!

 

Well guys, first I want to say I appreciate the help. I took off the cam sensor and oil poured out. So, my cma seals are shot probably due to the pcv system clog before I replaced it. Also, I decided to take off the timing cover and see how that side seals were and turns out they were leaking to and i found a puddle of oil in the bottom of the plastic cover. So, I would say that the two other cam seals are shot to right? I always had a leak there to just slower probably because most of it was being caught in the plastic cover.