Going to replace the lower front torque rod/mount on my son's 850 Turbo. Can anyone tell me the torque specs for the bolts. Picture is attached so you can tell what mount I am talking about.

Thanks

 

the 2 nuts: tighten to 48 ft/lb and then turn another 60 degrees
The 2 bolts: if they are M8 bolts, tighten to 13 ft/lb and then another 90 degrees, otherwise, tighten to 26 ft/lb and then another 60 degrees. Note that these are "torque to yield" fasteners- Volvo says you can re- use the bolts one time, but if there's any doubt as to whether they've been removed before, you should go get new ones, as you risk breakage if you reuse them a second or subsequent time.