Hey guys,

Im new to the forum. My fathers Volvo S40 T4's Head gasket is kaput. We have skimmed the head and is in the process of putting everything back together again. Could one of you guys please tell me what the torque settings and sequence is for the head bolts of the S40, please...

I also need the cam cover's torque settings and if there is any other torque settings I should know of, please let me know.

Thanks!

 

I need to find the info then I will post it.

 

Thanks man.

We have asked Volvo but they do not want to tell us. I have checked on the internet as well without any luck.

So it would be greatly appreciated.

 

The cam cover bolts are 17NM starting from the inside working out.
Here is a pic of the spec's for the headbolts. Same with then start in the middle and work out.

 

Thanks alot your'e the man, much appreciated. Will keep you guys updated.

 

plz can some one email me the cylinder head torque settings for my b4194t
Oil pump packed up wife drove car and cam belt jumped off i was told that valves bent i replaced pump and belts but still swings like no compression almost wanting to start