Hey guys got a 03 volvo s60 2.5L T AWD. Trying todo the rear sway bar links because there clicking. One problem that i'm having is that the stud were the hex bit goes (to keep the sway bar link from spinning) seems to be all rounded off on the insides any ideas on what i could do to get them off. I was thinking about grinding them off but there doesn't look like theres enough room & i don't have a torch.


TY for your help

 

See if a similarly sized Torx bit can be wedged in there.

 

Cut the boot and hold the ball/stud with vice grips and use an impact on the nut.