I am new to the forum and tried a search but did not find a thread. I purchased some nice leather seats that I am installing in another vehicle. They were marked as 2001 V40 but the heater control module cross references to a S60. I am intending to use the heated seat function and am trying to identify some of the wiring. Attached are two pictures. I believe the upper and lower elements are wired in series and the blue/red wire is the 12v and the black is the ground. the resistance between the two is about 80k ohms. There is a third wire, a pink/white one. I am not sure if this is for a high/low option or what it is for. It has about a 1200 ohm resistance to the blue/red wire and about 74k ohms to the black wire. Does anyone know ho these are wired? The second question is about two wires that go up to the back of the seat. They are in an orange corrugated loom. I attached a picture. What are these for?
Any help would be greatly appreciated.
Thanks,
Dave