engine check p1307
#23
RE: engine check p1307
Hi there.
You where right the first time. The A/C pressure sensor was bad.
I checked for the bad code, and then I replaced the sensor, and checked again, in a short period of time (10 minutes).
And it is wrong. The bad A/C sensor caused the ECM (computer) to get hot, and I needed to let it cool down of for an hour before checking it again. The resistance between terminal #1 and 3# on the bad sensor was 8 ohms, and on the good sensor the resistant is very high.
Thank you for your help. You are a real Pro.
Simon
You where right the first time. The A/C pressure sensor was bad.
I checked for the bad code, and then I replaced the sensor, and checked again, in a short period of time (10 minutes).
And it is wrong. The bad A/C sensor caused the ECM (computer) to get hot, and I needed to let it cool down of for an hour before checking it again. The resistance between terminal #1 and 3# on the bad sensor was 8 ohms, and on the good sensor the resistant is very high.
Thank you for your help. You are a real Pro.
Simon
Thread
Thread Starter
Forum
Replies
Last Post
Bruno937
Volvo S40
3
03-25-2008 08:31 AM
ariston18
Volvo S40
4
10-23-2006 10:26 PM