If I remove the connector on the MAF sensor while the car is running then I put it back,should the car stall or keep on running.
I am trying to Isolate a problem and I want to make sure the MAF is not the culprit.
help anyone

 

It should keep running. It will also toss a CEL. What problem are you trying to isolate?

 

When I do that the car Stalls,does that mean the sensor is Bad.or can an Exhaust leak have the same effect

problem with my car running poorly.

 

I'm not sure. I've had cars run with them disconnected so maybe I don't know what that would mean. I would guess that it will stay where it is when you pull the plug on it.

What codes do you have in the OBD-II port?

 

thanks,but maybe you are not even reading what i asked correctly.
The car starts if i disconnect it,It only stalls when the car is Running,unplug it and then when I plug it back that,s when it stalls.