problem with torque convertor or something else
Thread Starter
|
Junior Member
Joined: Jan 2013
Posts: 15
Likes: 0
From: Toronto
problem with torque convertor or something else
Hello All,
I purchased 2007 S80 V8 with some issues what I want resolve.
Used Vida and I got the attached codes.
In general, I have jerky ride - sometimes is OK, but the most time is not. I have leakage in manifold (oil is drooping) and I purchased all the parts for replacement. Based on codes, could you please let me know if I have problem with 'torque signal' (what is part # for it) or the existing problem with manifold is triggering problem. As for transmission, I have checked and it is 'K' (the model after Volvo fixed valve body).
Looking for some directions ....
I purchased 2007 S80 V8 with some issues what I want resolve.
Used Vida and I got the attached codes.
In general, I have jerky ride - sometimes is OK, but the most time is not. I have leakage in manifold (oil is drooping) and I purchased all the parts for replacement. Based on codes, could you please let me know if I have problem with 'torque signal' (what is part # for it) or the existing problem with manifold is triggering problem. As for transmission, I have checked and it is 'K' (the model after Volvo fixed valve body).
Looking for some directions ....
Senior Member
Joined: Nov 2020
Posts: 207
Likes: 20
From: CT
Well I would start with your intake leak and go from there. First code could be from old, used and abused transmission fluid. Make sure you have correct location of the leak and fix properly. Drain and fill on the transmission works wonders, as does a properly working engine.
Thread Starter
|
Junior Member
Joined: Jan 2013
Posts: 15
Likes: 0
From: Toronto
As for leak, I am planning full service (change whatever is on the way from hood to bottom of car). I bought set from FCP Euro and I am going wait for a few more weeks for completion.
Thread
Thread Starter
Forum
Replies
Last Post
