these are most of the codes the Volvo dealership pulled up before reprogramming my ABS BCM Module .....

Going to get the Volvo scanned again to see if any of those codes are
present ,

Anyways ......... After leaving dealership traction light comes on
and car hesitates for the first few hundred feet then drives fine
afterwards (this only happens after starting the car each time)

If this car wasn't so heavy and hard to stop I wouldn't
worry about the ABS........

any ideas out there are welcome.....

 

Update Most of these codes were taken care of when I had the BCM programmed

Just have wheel speed sensor code (BCM-0011) remains