Volvo Maf / Turbo control issues
Thread Starter
|
Junior Member
Joined: May 2020
Posts: 1
Likes: 0
Volvo Maf / Turbo control issues
Any mechanics that could help here - On Vida I get the following codes -
Control module voltage too low
Mass air flow - faulty signal
Mass air flow - Signal too low
Turbo control - too low pressure
I took it for a drive whilst plugged in. It showed an air mass reading so presume the man is working to a degree. The EGR valve is constantly on 100% though.
The car is slow on acceleration although its a 1.6 drive haha. Ive cleaned the man sensor, my next stage is to buy a new man sensor.
Before I do just wondering if anyone has had similar issues.
Control module voltage too low
Mass air flow - faulty signal
Mass air flow - Signal too low
Turbo control - too low pressure
I took it for a drive whilst plugged in. It showed an air mass reading so presume the man is working to a degree. The EGR valve is constantly on 100% though.
The car is slow on acceleration although its a 1.6 drive haha. Ive cleaned the man sensor, my next stage is to buy a new man sensor.
Before I do just wondering if anyone has had similar issues.
Thread
Thread Starter
Forum
Replies
Last Post
dieselsnowmobile
Volvo 240, 740 & 940
9
Oct 30, 2011 05:04 PM