hose connection problem - manifold
Thread Starter
|
Junior Member
Joined: Jun 2013
Posts: 10
Likes: 0
hose connection problem - manifold
Hi V70ers,
I have a 2000 Volvo V70 AWD SE. I needed to replace the ETM. However, three of the four bolts snap off where the ETM connects to the intake manifold. So, I had to remove the manifold and drill out the broken bolts. Then I got ill with a virus for about 4 days and could not work on the car.
Now, for the life of me, I can't remember how the hoses connect to the manifold. It has that three-way coupling with two 3/4 inch hose coming out of two connections and a small nipple connector in the middle for a tiny hose.
HELP!! I was stupid and did not take pictures thinking I would remember; but, the four day absence from working on the car and I've completely forgot.
In fact any help with the hoses would be greatly appreciated.
Thanks !!
I have a 2000 Volvo V70 AWD SE. I needed to replace the ETM. However, three of the four bolts snap off where the ETM connects to the intake manifold. So, I had to remove the manifold and drill out the broken bolts. Then I got ill with a virus for about 4 days and could not work on the car.
Now, for the life of me, I can't remember how the hoses connect to the manifold. It has that three-way coupling with two 3/4 inch hose coming out of two connections and a small nipple connector in the middle for a tiny hose.
HELP!! I was stupid and did not take pictures thinking I would remember; but, the four day absence from working on the car and I've completely forgot.
In fact any help with the hoses would be greatly appreciated.
Thanks !!
Thread
Thread Starter
Forum
Replies
Last Post