I have been dealing with this problem for a couple weeks I have searched multiple posts and seen this is a common problem however cannot find a resolution through everything that is posted. However I have no power to the solenoid wire when cranking ignition switches good antenna ring has been replaced I am getting a code TCM 012 a TCM 012-b neutral check faulty connection. Is this the PNP switch? Can I test it/ bypass to test? Even running 12 volts to the solenoid wire won't get the car to actually start I have fuel pressure at the rail but no injectors spraying. Could the ECU be preventing the starter and injectors to operate? Any help would be greatly appreciated as I am in Alaska,no dealership here.

 

Is the starter relay working properly?

 

it is working.

 

So you have power from the relay but not at the solenoid?

The problem is between the two.