Volvo Penta DPS-OXI DTC 713
Thread Starter
|
Member
Joined: Nov 2021
Posts: 52
Likes: 5
Volvo Penta DPS-OXI DTC 713
My 2011 Volvo Penta DPS-OXI is giving me a DTC with a SPN=713 - Water in drive oil or input short to voltage. FMI=3 - voltage high.
This drive was completely rebuilt last fall and has not been in the water until this week where it was put in the water and started up.
It was started on a work rack using muffs and I did not see the DTC until it went in the water.
Could something have been left unconnected when the drive was reinstalled?
The Diacom scanner worked great to pull the DTC.
This drive was completely rebuilt last fall and has not been in the water until this week where it was put in the water and started up.
It was started on a work rack using muffs and I did not see the DTC until it went in the water.
Could something have been left unconnected when the drive was reinstalled?
The Diacom scanner worked great to pull the DTC.
Thread Starter
|
Member
Joined: Nov 2021
Posts: 52
Likes: 5
Ocean-X
The I/O has the Ocean-X option that monitors drive oil quality.
It looks like the DOQ needs to be reset if the drive gear oil is changed or similar things have been done. Otherwise incorrect DTCs can be issued.
It looks like the DOQ needs to be reset if the drive gear oil is changed or similar things have been done. Otherwise incorrect DTCs can be issued.
Thread
Thread Starter
Forum
Replies
Last Post