Volvo 850 se Exhaust
#1
Volvo 850 se Exhaust
Hi all,
I am fairly new here, got myself my first Volvo and loving it a great deal.
I decided to put a lukey exhaust on it a few days ago, just to get a bit of a note to the engine, this is the result.
Cheers
Video
Oh, its a N/A 1996 850 se. Aus model.
I am fairly new here, got myself my first Volvo and loving it a great deal.
I decided to put a lukey exhaust on it a few days ago, just to get a bit of a note to the engine, this is the result.
Cheers
Video
Oh, its a N/A 1996 850 se. Aus model.
Last edited by Sipheren; 05-07-2009 at 05:23 PM.
#6
How'd ya guess
Mine was a bit boomy at around 2000rpm, but I think that was due to a resonance in the tail gate.
Yesterday I pulled it apart and did some sound deadening.
Two layers of mat on the skin, one layer of closed cell foil backed foam on top of that, sealed what holes I could with more of the CC foam, then a final layer of the CC foam on the inside of the trim.
Need to go and do a sound vid soon...
EDIT.
Just a quick vid (3.1Mg), not much of a rev as it was a cold start as you might be able to see from the water spitting out.
http://www.yourfilelink.com/get.php?fid=495029
If anyone is interested I'll do a better one later...
Mine was a bit boomy at around 2000rpm, but I think that was due to a resonance in the tail gate.
Yesterday I pulled it apart and did some sound deadening.
Two layers of mat on the skin, one layer of closed cell foil backed foam on top of that, sealed what holes I could with more of the CC foam, then a final layer of the CC foam on the inside of the trim.
Need to go and do a sound vid soon...
EDIT.
Just a quick vid (3.1Mg), not much of a rev as it was a cold start as you might be able to see from the water spitting out.
http://www.yourfilelink.com/get.php?fid=495029
If anyone is interested I'll do a better one later...
Last edited by ShaginWagon; 05-09-2009 at 08:02 PM.
#7
How'd ya guess
Mine was a bit boomy at around 2000rpm, but I think that was due to a resonance in the tail gate.
Yesterday I pulled it apart and did some sound deadening.
Two layers of mat on the skin, one layer of closed cell foil backed foam on top of that, sealed what holes I could with more of the CC foam, then a final layer of the CC foam on the inside of the trim.
Need to go and do a sound vid soon...
EDIT.
Just a quick vid (3.1Mg), not much of a rev as it was a cold start as you might be able to see from the water spitting out.
http://www.yourfilelink.com/get.php?fid=495029
If anyone is interested I'll do a better one later...
Mine was a bit boomy at around 2000rpm, but I think that was due to a resonance in the tail gate.
Yesterday I pulled it apart and did some sound deadening.
Two layers of mat on the skin, one layer of closed cell foil backed foam on top of that, sealed what holes I could with more of the CC foam, then a final layer of the CC foam on the inside of the trim.
Need to go and do a sound vid soon...
EDIT.
Just a quick vid (3.1Mg), not much of a rev as it was a cold start as you might be able to see from the water spitting out.
http://www.yourfilelink.com/get.php?fid=495029
If anyone is interested I'll do a better one later...
Thread
Thread Starter
Forum
Replies
Last Post
turbowagon94850305
For Sale / Trade - Archive
0
07-31-2010 10:48 PM
Fluxmotoring
Official Sponsor Sales & Group Buys
0
11-18-2008 02:53 PM