92 240 wagon ignition switch removal
#1
92 240 wagon ignition switch removal
I'm trying to replace the electrical portion on the back of my ignition switch.
I've removed many trim pieces and the instrument cluster and am still having
a hard time getting to this area from top or bottom. Any advice on what to do next? Any help is much appreciated.
I've removed many trim pieces and the instrument cluster and am still having
a hard time getting to this area from top or bottom. Any advice on what to do next? Any help is much appreciated.
#2
I got this pix from a guy over on Brickboard it may help
https://volvoforums.com/forum/album....pictureid=2305
https://volvoforums.com/forum/album....pictureid=2305
#3
Thanks for the photo. I was finally able to get the piece off with a modified
stubby screwdriver and a lot of patience. Three pins were burned pretty badly. Once it was replaced, all seems to be fine. Now if I can just all those trim pieces to fit back in and not have any screws left over....
stubby screwdriver and a lot of patience. Three pins were burned pretty badly. Once it was replaced, all seems to be fine. Now if I can just all those trim pieces to fit back in and not have any screws left over....
Thread
Thread Starter
Forum
Replies
Last Post
jonqu
Volvo 240, 740 & 940
9
09-09-2013 12:31 PM
Klint
Volvo S40
1
10-28-2012 07:16 PM
volvoloco
Volvo S40
2
06-27-2011 07:44 PM